For rubbing, smoothing, restoration, resurfacing, repairingPavecrete*Dual Bonding Action Positive mechanical bond plus chemical bond ensures adhesionA unique single component product, specifically designed to rub, smooth and finish vertical concrete. It will feather edge without chipping or flaking and will retain its hardness and toughness. Provides a smooth consistent light gray finish to blend with exterior cured concrete. PAVECRETE comes in a light gray, it is also available in white and sand mix
Single Component Rubbing, Repairing ResurfacingPavecrete PlusEXTENDED WORKING TIME USE FOR WALLS AND FLOORS USE INSIDE AND OUT LIGHT GRAY, BLENDS WITH CONCRETEA versatile polymer-modified single component product. It can be used to rub, smooth and finish vertical and overhead concrete. PAVECRETE PLUS can also be as a skim underlayment or applied as a 1/4" horizontal topping for foot to car traffic. It has extended working time and an exceptional bond strength. PAVECRETE PLUS comes in a light gray, it is also available in white.
Dual Bonding Action, Rubbing, Smoothing, Repairing, Restoration, ResurfacingPavecretePrimoExtra rich for smooth, easy troweling. Holds moisture while spreading or rubbingPAVECRETE PRIMO is a Portland Cement based product with graded silica aggregates and special chemical additives for bonding, hardening and moisture retention. It is formulated for smoothing, rubbing and thin coat patching applications. PAVECRETE PRIMO has a smooth, rich texture making it simple and easy to apply. After curing, it is not water sensitive, it has the setting and curing properties of regular concrete. Use of PAVECRETE PRIMO can help your project earn LEED Credits. Contact factory for details.
TWO COMPONENT, ACRYLIC POLYMER MODIFIED, TOPPING AND UNDERLAYMENT, OVERHEAD AND WALL REPAIRSPatchcrete *Bonds to any Concrete Surface *Light Gray to Blend with Existing Concrete *Improved Bond and Compressive StrengthA very versatile product with an outstanding bonding characteristic. It is a two component product, a single unit includes a 45 lbs. bag of powder with a gallon of liquid polymer. It can be applied horizontally, vertically or even overhead. Horizontally, it may be applied from featheredge to 2 1/2 inch thickness (over 1/2 inch with aggregate) in one application, may be applied as a topping or underlayment. It can also be mixed to a thicker consistency and used as a trowelable repair material for wall and overhead applications. PATCHCRETE comes in light gray or white and can accept integral color or stains
INTERIOR SELF-LEVELING UNDERLAYMENT, PUMPABLE AND POURABLE, VALUE ENGINEERED, EASY TO USESuper Flowcrete
Use as wearing surface Use as an Underlayment Use as Decorative flooring SufaceAn interior self-levelling product with a wide variety of applications. It can be used as an underlayment or a wearing surface. SUPER FLOWCRETE has a high abrasion resistance and can be used in warehouse or light manufacturing environments with hard rubber tire forklift traffic. As it accepts integral color or stain SUPER FLOWCRETE can also be used as a decorative topping. It has a compressive strength exceeding 6000 PSI. It may be applied from featheredge to 2 inches in one application. No curing or troweling is required for SUPER FLOWCRETE. It may be used over cutback and is pumpable. SUPER FLOWCRETE utilizes P-100 Primer as its surface bonder.
RUBBING & SKIM COAT, SELF-DRYING, INSTALL FLOORING IN 1-2 HOURSFinishcrete USE INSIDE OR OUTSIDE USE AS A WEARING SURFACE FINISHCRETE USE FOR VERTICAL & HORIZONTAL SURFACESSpecially designed single component product to be used in thin toppings or coverings where there is a need to quickly apply non-breathable coatings or flooring products. It can be applied indoor or outdoor, horizontal or vertical. It utilizes a self-drying technology that permits non-breathable coatings to be applied after only 1 - 2 hours. It is ideal for applying to walls prior to painting. FINISHCRETE can also be used for parging walls prior to application of waterproof membranes. It is also ideal for skim coating or quick patching floors prior to installation of epoxy, polyurethane coatings or seamless flooring systems.
PRIMER AND SURFACE BONDING, BONDING ADMIXTURE, VOC COMPLIANTP-100 PrimerBOND NEW CONCRETE TO OLD ONE TIME REEMULSIFIABLE PRIMER FOR PATCHCRETE, POWER-CRETE, SUPER FLOWCRETE, CAST-PATCH & PAVEQUICK HRAn excellent quick drying primer and surface bonder with extremely high solids count. It is a film forming, VOC compliant and will re-emulsify only one time, eliminating moisture sensitivity. P-100 is required to be used as a primer with FLOWCRETE, SUPER FLOWCRETE, CAST-PATCH, POWER-CRETE and PAVEQUICK HR. It can also be used as a surface primer for other concrete toppings and as an integral polymer modifier for cement mortars
ANCHORING CEMENT NON SHRINK GROUTFlow-RockOver 5,000 PSI in 1 hour Over 10,000 PSI in a day Over 35,000 PSI pullout strengthAn extra strong, expansive anchoring cement with compressive strength exceeding 11,000 PSI and pull out strength exceeding 35,000 PSI. It may be used for a wide variety of anchoring applications. Excellent for handrail and anchor bolt applications.
EXTERIOR ANCHORING CEMENT NON-SHRINK GROUTSuper Flow-Rock FAST SETTING HIGH COMPRESSIVE STRENGTH OVER 40,000 LBS. PULLOUT STRENGTHAn extra strong, expansive anchoring cement designed for environments with heavy or even continuous exposure to water. SUPER FLOW-ROCK has a compressive strength exceeding 9,500 PSI and a pull out strength exceeding 40,000 lbs. It may be used for a wide variety of anchoring applications.
FAST SETTING HYDRAULIC CEMENT TO STOP WATER LEAKS IN CONCRETE AND MASONRYPlug-Crete READY TO PLUG 60-90 SECONDS STOP WATER LEAKS IMMEDIATELY OVER 8000 PSI COMPRESSIVE STRENGTHStops water leaks immediately. It is ready to plug in 60-90 seconds and hard in 2-3 minutes. PLUG-CRETE reaches a compressive strength of over 8000 PSI. PLUG-CRETE is also available in 5-7 minute and 12-15 minute hardness times.
SINGLE COMPONENT INTERIOR/EXTERIOR PRE-CAST REPAIR MORTAR WITH CORROSION INHIBITORSCast-PatchHIGH STRENGTH FAST SETTING TIME HORIZONTAL, VERTICAL AND OVERHEAD REPAIRA one-component repair material specifically designed to repair pre-cast concrete. CAST-PATCH is fast setting trowel grade mortar that can be shaped by sanding and shaving. CAST-PATCH reaches a Compressive Strength of 6400 psi and is suitable for a wide range of other applications.
RAPID SETTING TOPPING 8900 PSI COMPRESSIVE STRENGTH READY FOR SERVICE IN 8 HOURSPower-CreteSINGLE COMPONENT STRUCTURAL REPAIR MATERIAL WITH CORROSION INHIBITORS USE DOWN TO 32FA one component structural repair material. It is rapid setting, with a high early strength and an outstanding bond. POWER-CRETE can be applied from 1/2 inch to 6 inch with no aggregate needed. It can be used in horizontal repairs interior or exterior, above or below grade. POWER-CRETE utilizes P-100 Primer as its surface bonder.
ROAD AND HIGHWAY REPAIR OVER 3000 PSI IN THREE HOURS ECONOMICAL----- Pavequick HR -----FAST SETTING HIGH EARLY STRENGTH OVER 8200 PSI IN 7 DAYS FULL DEPTH ROAD REPAIRS READY FOR SERVICE IN THREE HOURSA rapid setting road and highway repair. It has a high early strength, about 2600 PSI, allowing repairs to be ready for service in two hours. PAVEQUICK HR can be used from 2 inch to FULL DEPTH and expands slightly allowing a tight fit to help reduce water penetration. PAVEQUICK HR meets or exceeds most state DOT criteria. Please contact us for current state approvals.
NON-SHRINK NON-METALLIC HIGH STRENGTHLyons NS Grout
POURABLE/PUMPABLE CAN BE MIXED FROM FLUID TO DRY PACKA ready-to-use, non-shrink, non-metallic, non-corrosive grout. It attains a high strength of 11,000 PSI. Typical uses for LYONS NON-SHRINK GROUT include grouting under machinery base plates, structural steel to concrete, column baseplates, and general purpose concrete grouting.
INTEGRAL BONDING AGENT EMULSION HIGH SOLIDS CONTENT EASY TO USEacrylic-bondIMPROVED BOND STRENGTH IMPROVED COMPRESSIVE, FLEXURAL AND TENSILE STRENGTH INTERIOR OR EXTERIOR USEArchitectural quality acrylic latex emulsion for interior or exterior use as an admixture for concrete. It has a high solids content and can be used for a wide variety of concrete and masonry applications. ACRYLIC-BOND is non-reemulsifiable, it will not rewet with future exposure to water.
FOR INTERIOR & EXTERIOR APPLICATIONS INTEGRAL BONDING AGENT EMULSION EXCELLENT SURFACE BONDERbondall VOC COMPLIANT HIGH SOLIDS RE-EMULSIFIES ONE TIME ONLYA one time reemulsifiable liquid bonding agent and polymer modifier for concrete and masonry. It can be used interior or exterior and as a surface bonder above or below grade. BONDALL has a high solids content and is VOC compliant.
INTERIOR SELF-LEVELING UNDERLAYMENT PUMPABLE AND POURABLE VALUE ENGINEERED AND EASY TO USEFlowcrete SLU+ *Can Be Applied Up To 3 Inches *Can Be Applied Over Concrete & Ceramic Tile *Allows Rapid Installation of Most Floor CoveringsA cement based, non-shrinking, self leveling floor underlayment designed for interior use. This single component product produces a smooth subfloor that will accept floor coverings in as little as 12 - 18 hours after installation. Just mix FLOWCRETE SLU+ with water, pour or pump, and it will seek its own level to produce a smooth, flat hard surface
HIGH PERFORMANCE HIGH STRENGTH EPOXY GROUT 100% SOLIDSLyons Epoxy Grout Fast Curing High early Strength Excellent Volume StabilitySpecially formulated three component, 100% solids, high strength, low exotherm epoxy grout. The system combines a high strength epoxy resin and curing agent with a specially engineered blend of graded aggregates. The special aggregate blend provides excellent flow and uniform distribution throughout the high strength epoxy matrix. The low exotherm epoxy resin allows a long work time and deep pour capabilities.
BONDING ADHESIVE 100% SOLIDS BONDS CONCRETE, STEEL AND WOODEP-1000 EPOXY HIGH STRENGTH PRESSURE INJECTION SOLVENT-FREEA two component, low viscosity, moisture insensitive, high modulus, structural epoxy bonding adhesive and crack injection resin. EP 1000 Epoxy is 100% solids, solvent free, low odor, and high strength.
structural epoxy bonding gel 100% solids---- EP 300 ES EPOXY ----SOLVENT-FREE HIGH STRENGTH SEALS, PATCHES, ANCHORSEP 300 FS is a two-component, moisture insensitive, high modulus, structural epoxy bonding gel. EP 300 FS is 100% solids, solvent-free, low- odor, highstrength, and non-sag. • Anchors bolts, dowels, and reinforcing steel • Vertical and overhead structural bonding and patching • Sealing of cracks and the setting of injection ports • For use in concrete, block, brick, or stone • VOC Content = 0 grams per liter. test